CRC error: open hard drive showing the platter and read head
|

What Is a CRC Error? Causes and How to Fix It

You try to copy a file, open a drive or unzip an archive and Windows answers with “Data error (cyclic redundancy check)”. That is a CRC error. It means the data your computer read does not match the check value stored with it, so something has been damaged on the way. Sometimes the cause is a loose cable. Sometimes it is a drive that is starting to fail. This guide explains what a CRC error is, what causes it and the order in which to try the fixes so you do not lose files.

Key takeaways

  • A CRC (cyclic redundancy check) error means data failed an integrity check and may be corrupted.
  • Common causes are bad sectors, file system damage, a faulty cable or port, an interrupted transfer, or a corrupted download.
  • Copy your important files off the drive first, before running repair commands such as CHKDSK.
  • If the error appears while extracting a ZIP or RAR file, the archive is usually damaged. Download it again.
  • If errors keep coming back on the same drive, replace the drive.

What is a CRC error?

A cyclic redundancy check is an error-detection method. When data is written or sent, a short value is calculated from the data and stored or sent along with it. When the data is read back, the value is calculated again. If the two do not match, the data has changed and the system reports a CRC error. It is closely related to the idea of a checksum, which we explain in our guide to what a checksum error is.

CRC is used almost everywhere: hard drives and SSDs, USB sticks and SD cards, ZIP and RAR archives, and Ethernet network frames. The error message looks different depending on where it appears, but the meaning is the same.

Where you might see a CRC error

Where it appearsTypical messageMost likely cause
Internal or external driveData error (cyclic redundancy check)Bad sectors, file system errors, failing drive, loose cable
USB stick or SD cardDrive is not accessible. Data error (cyclic redundancy check)Corrupted file system, unsafe removal, worn-out flash memory
Copying filesCannot copy file: data errorA damaged file or a bad area on the disk
ZIP, RAR or 7z archiveCRC failed in fileIncomplete or corrupted download, damaged archive
Network switch or routerCRC errors on an interfaceBad cable, interference, duplex mismatch

What causes a CRC error?

  • Bad sectors: areas of a drive that can no longer store data reliably.
  • File system corruption: caused by sudden shutdowns, power loss or removing a drive without ejecting it.
  • Faulty cable, port or adapter: a poor connection can corrupt data in transit.
  • Failing hardware: an aging hard drive, a worn SSD or a dying memory card.
  • Interrupted transfer: a download or file copy that stopped before it finished.
  • Malware or software problems: less common, but they can damage files or the file system.

Before you fix anything: protect your data

Repair tools can change what is stored on the drive. If the drive is failing, running them can make things worse. If the files matter to you, copy them somewhere else first.

  1. Connect the drive to a different USB port or another computer.
  2. Copy the files you need to a healthy drive. If Windows refuses to copy certain files, skip them and copy the rest.
  3. If the drive holds important files and will not copy, stop and consider a professional data recovery service. Continued use of a failing drive can reduce what can be recovered.

Fix 1: Check the cable, port and connection

Start with the simple things. Unplug the drive, plug it into a different USB port, and use a different cable if you have one. For an internal drive, a loose SATA data cable can cause the same error. Avoid USB hubs, which sometimes cause trouble with external drives.

Fix 2: Run CHKDSK

CHKDSK is the built-in Windows tool that scans a drive for file system errors and bad sectors. Only run it after you have copied your important files, because it can remove data it cannot repair.

  1. Open the Start menu, type cmd, right-click Command Prompt and choose Run as administrator.
  2. Type the command below, replacing E: with the letter of the affected drive, and press Enter.
chkdsk E: /f /r

The /f option fixes file system errors and /r looks for bad sectors and tries to recover readable data. On a large drive the scan can take hours. Let it finish.

Fix 3: Repair damaged Windows system files

If the error affects your main Windows drive, scan the system files. In an administrator Command Prompt, run these two commands one after the other:

sfc /scannow
DISM /Online /Cleanup-Image /RestoreHealth

Fix 4: Check the health of the drive

In Windows PowerShell you can ask the drive for a basic health status:

Get-PhysicalDisk | Select-Object FriendlyName, HealthStatus, OperationalStatus

A status other than Healthy means the drive needs attention. For more detail, the free tool smartmontools reads SMART data, which includes counts of reallocated and pending sectors. Rising values are a warning sign that the drive is wearing out.

Fix 5: Fix a CRC error in a ZIP or RAR file

  • Download the file again. This fixes most cases, because the first download was probably incomplete.
  • Try a different download source or a different network connection.
  • Extract with a dependable tool such as 7-Zip, which reports which files inside the archive are damaged.
  • If you have a checksum published by the site, compare it with your file. Our article on checksum errors shows how to verify a download with built-in commands.

Fix 6: Repair or reformat a USB stick or SD card

If a flash drive shows a CRC error, copy off what you can, then run CHKDSK as above. If errors continue, reformatting the drive may clear a damaged file system. Reformatting erases everything on the drive, so do it only after you have saved your files. A memory card that keeps failing after a reformat is worn out and should be replaced.

CRC errors on a network

On routers and switches, CRC errors are counted per interface. A growing count usually points to a bad Ethernet cable, a damaged port, electrical interference or a duplex mismatch between two devices. Replace the cable first, then check the port and the speed and duplex settings on both ends.

When to replace the drive

A drive that shows repeated CRC errors, a growing number of bad sectors, clicking sounds or slow reads is likely failing. At that point repairing the file system only treats the symptom. Back up your data, replace the drive and restore your files to the new one. Keeping at least one extra copy of important files is the best protection against drive failure.

Frequently asked questions

Is a CRC error the same as a checksum error?

They are closely related. CRC is one type of checksum calculation, mainly used to catch accidental data changes. Both mean that the data does not match its stored check value.

Can a CRC error be fixed?

Often, yes, if the cause is a cable, a file system problem or a damaged download. If the cause is failing hardware, you can usually only recover your data and replace the drive.

Will CHKDSK delete my files?

It can. When CHKDSK cannot repair a damaged area, it may remove or truncate the data in it. That is why you should copy your files first.

Does a CRC error mean my hard drive is dying?

Not always. A bad cable or an interrupted transfer can produce the same message. But repeated errors on the same drive are a warning that it may be failing.

Can I recover files from a drive with a CRC error?

Often partly. Copy what you can, and use data recovery software or a recovery service for the rest. Avoid writing new data to the drive while you do this.

Last updated November 18, 2026.

Related guides